Elegoo Neptune 4 Max

Elegoo Neptune 4 Max

(UPDATED)

Let me start all of this with I am not an engineer nor an expert at 3D printing. This is all just shit that I have picked up over the years, read about or came across. I just want to spread some information and maybe help someone. Try the following at your own risk, I am not responsible for what you do. Don’t believe everything you read on the internet.

 

Intro

A month or so ago I upgraded my trusty old Monoprice Maker Select v2.1 to a Elegoo Neptune 4 Max. Wow. I’ve been printing non stop. This thing is a beast! Its freaking huge and it prints fast! My Monoprice is still going strong, and I actually gifted it to my son-in-law, but I needed a bigger build platform and I wanted speed. It was down to an Anycubic Kobra 2 Max or the Elegoo Neptune 4 Max. If you do your research you will find tons of posts of people that got the N4M and hated it, to return it and get the Kobra 2 Max. With just as many people who did the opposite and ended up sending the Kobra 2 Max back to get a Neptune 4 Max. I was sold on the fact that it runs Klipper. It may be an Elegoo version of Klipper but it is Klipper. There are people working on OpenNept4une, a firmware replacement for Elegoo’s Klipper. I have also heard that someone is working on a pure Debian version of community Klipper. That would be fantastic. Unfortunately this requires buying a USB to eMMC adapter to flash the machine which I don’t have. I have not done this yet and I am not sure if I will. But it is an option. You can find more information on the Elegoo Discord. Some are also upgrading the main board to something like a BTT Manta and Pi TFT50. One of the things I’ve heard when playing with the alternate firmware(s) is you may lose the functionality of the touchscreen, no bueno.

If you are new to printing or this is your first don’t expect a nice fat user manual or handbook to walk you through. You are going to have to survive off a collection of online help. Don’t expect to get a ton of super helpful customer support from a company in China like Elegoo. You are much better off on their Discord or in a Facebook group, and websites.

Even with my knowledge of the past few years it took me almost two full rolls of filament to get it dialed in. But now it prints beautifully every time, and fast. So expect to be tweaking your profile for a bit and doing lots of bed leveling and printing lots of first layer sheets and benchys along with XYZCubes. Run the tests, it helps.

The following is a mash up of some tips I have tried and figured out, or I have read about and found online.

Some of these steps may seem tedious or you just don’t want to do them, but it will save you time, headache, and filament – which is money. When I first started out for the longest time I never wanted to “waste” time with the calibration prints. Trust me you waste more time by not doing them. Orca makes it easy now anyway.

View Post